What gold metal bag feet actually do
Bag feet are small metal fittings fixed to the base of a bag so the bottom of the bag does not rest directly on the ground. BOHIN's pieds de sac doré are made entirely of metal, which the product information describes as a robust material that resists knocks to the bag's base. The gold finish is one of two colour options, the other being silver.
The practical case for adding them is straightforward: the base is one of the parts of a bag that wears fastest, especially when a bag is set down carelessly or placed on dirty surfaces. Feet raise the base slightly and take the contact instead. They also add a visible decorative detail, so they work as a customisation element on handmade bags as well as a protective one on ready-made bags.
The BOHIN pieds de sac doré at a glance
- Pieds de sac doré: 15 mm diameter, sold in packs of four Four feet is the usual working set for one bag base, and 15 mm is the only size stated in the supplied information, so check that this scale suits your bag before ordering.

Pieds de sac doré - Pieds de sac doré: Two colourways: gold (doré) and silver (argent) The colour decision is aesthetic, but it should be made against your bag's other hardware rather than in isolation.
- Pieds de sac doré: Entirely metal construction Metal is the reason the feet can absorb contact with the ground; it also means the finish, not the material, is what you are matching to your bag.
- Pieds de sac doré: Compatible with fabric, leather and faux leather This is the key compatibility statement in the supplied information and it covers most bag-making materials.
Gold or silver: a decision about the whole bag
The supplied information describes both finishes as classic colours that work with many colour combinations and adapt to all bags. That is a fair description of why these two finishes are the standard choices, but it does not decide the question for you. Look at what else is visible on the bag: a gold-toned clasp, zip pull or chain makes the doré version the coherent pick, while a silver-toned buckle or ring pulls the other way. On a bag with no visible metal at all, either finish reads as a deliberate detail rather than a match.
There is no third colour in the supplied information, so if your bag's hardware is neither gold nor silver, the honest answer is that this particular product will not match it exactly. That is a limitation of the range, not a flaw in the feet.
Which bags suit these feet
The product information names handbags, sports bags and travel bags as suitable uses. The common thread is a bag that gets set down and needs its base protected.
- Handbags: The most obvious use: feet keep the base off the ground and add a finished, decorative touch to the underside.
- Sports bags: Bags that are put down on changing-room floors and outdoor surfaces are exactly the case where base protection pays off.
- Travel bags: The same logic applies on a larger scale, though the 15 mm size is the only one supplied, so judge whether it looks proportionate on a large bag.
- Handmade bags: The product information explicitly presents the feet as a customisation or bag-making component, so they can be planned into a project from the start.
How the feet are fixed, and what that means before you buy
The supplied information describes a simple, no-sew fixing. Read it before you commit, because it determines whether your bag base can take the feet at all.
- 1. Mark the positions: The feet come in two parts: a retaining washer and the round foot itself. The washer can be used as a guide to mark where the holes should go.
- 2. Pierce small holes: Pierce small holes in the base of the bag where you want each foot. This is the step that matters most for a finished bag: the base must be something you are willing to pierce.
- 3. Insert the foot: Slide the prongs of the foot through the holes so the fabric sits between the foot head and the washer.
- 4. Bend the prongs: Bend the prongs back to hold the material in place. No sewing is required at any stage.
The trade-off to weigh before you pierce anything
The no-sew fixing is an advantage on a bag you are making, because you can place the feet exactly where you want them. On a finished bag it is a one-way decision: once the base is pierced, the holes are there. If you are unsure, that uncertainty is worth taking seriously rather than treating the feet as a reversible accessory.
The supplied information does not state how much load the feet carry, how thick a material the prongs will pass through, or whether a backing reinforcement is needed. Those are the questions to settle with a scrap test in your own material before working on the bag itself. It also does not give care instructions for the gold finish, so avoid assuming a cleaning routine that is not stated.
Where these feet fit in your bag-making supplies
If you are already buying bag hardware, the pieds de sac doré are a small, low-risk addition: one pack of four covers a standard bag base, and the metal construction means they are doing real protective work rather than only decorative work. Match the finish to your other hardware, confirm that 15 mm suits the scale of your bag, and check that you are happy to pierce the base. If all three answers are yes, the decision is settled.


