How to Sew a Bias Binding Foot: Step-by-Step Guide
By BOHIN | Published: 2026-10-28
Category: How-to Guides
Learn how to use a bias binding foot to attach bias tape in one step. This guide covers setup, stitching, and common mistakes.
Quick Answer
To sew a bias binding foot, snap it onto your machine, guide the bias tape through the foot's channel, and stitch slowly while keeping the fabric edge aligned. This tool attaches bias tape in one pass, saving time and ensuring even results.
Why Use a Bias Binding Foot?
A bias binding foot is a specialized presser foot that feeds bias tape through a channel and stitches it to your fabric in one step. This eliminates the need to pin or iron the tape first, making the process faster and more consistent.
Compared to using a regular foot, this tool reduces fabric shifting and ensures the tape is applied evenly. However, it requires a bit of practice to get the tension and alignment right, especially on curves.
Choosing the Right Bias Tape Width
Bias binding feet are adjustable to accommodate different tape widths. The BOHIN bias binding foot, for example, fits bias tape from 5 to 20 mm. Before starting, check that your tape width matches the foot's adjustment range.
If the tape is too wide or too narrow, the stitching may miss the tape edge or cause puckering. Always test on a scrap fabric first to confirm the width and stitch position.
Step-by-Step: How to Sew with a Bias Binding Foot
- Install the Foot: Remove your regular presser foot and snap the bias binding foot onto your sewing machine. Make sure it is securely attached and the needle aligns with the center of the foot's channel. If the foot is not properly attached, the needle may hit the foot and break.
- Adjust the Tape Width: Loosen the adjustment wheel on the foot and set it to match your bias tape width (e.g., 10 mm). Slide the tape through the channel to test the fit; it should move smoothly without slipping out. A too-tight fit can cause the tape to bunch, while a too-loose fit may let it slip and shift.
- Position the Fabric: Place your fabric under the foot, right side up. Insert the bias tape into the front of the foot, aligning its edge with the fabric edge. Lower the presser foot and adjust the needle position if needed. Ensure the tape is not twisted; otherwise, the stitching will be uneven.
- Stitch Slowly: Start sewing at a slow, steady speed. Guide the fabric and tape together, keeping the edge aligned with the foot's guide. On curves, pause and adjust the fabric as needed to avoid folds. Rushing can cause the tape to shift or pucker, especially on corners.
- Finish and Secure: At the end of the seam, backstitch a few stitches to secure the binding. Trim the threads and check the stitching from both sides; the tape should be evenly caught on the underside. If the underside shows missed stitches, increase the stitch length slightly or adjust the needle position.
Product Details
- Pied de biche spécial biais: The BOHIN bias binding foot guides bias tape through the fabric in one step and is adjustable for tape widths from 5 to 20 mm. This adjustability lets you use the same foot for different projects without needing multiple tools, and the one-step process saves time.
Pied de biche spécial biais
